RACK MODULE - HIGH VOLTAGE

Rack 4U High Voltage

HIGH VOLTAGE RACK MODULE

Features

Scalable up to 22 kWh per cluster and each cluster can be connected in parallel up to 110 kWh Self Balancing function with the smart hub WeHUB

Each module is 4,5 kWh of usable energy, high energy density, extreme safety, innovative design.

Rack High Voltage is the most compact Low Voltage stackable storage for domestic application, plug and play, compatible with several International Inverter

Single Module HV

Basic Parameters	5K3-XP HV RACK MODULE FOR INDOOR OR CABINET USE ONLY
Module Capacity (kWh)	5,3
Single Module Nominal Voltage (V)	51,2
Application	High Voltage Application
Expandibility	Max 16 Modules in series with Single HV Box = One HV Cluster Max 10 HV Clusters composed by maximum 16 modules in series connection
Voltage Range (Vdc)	47,5-58,4 BMS Dinamically adjust the operating values
Capacity (Ah)	105
Dimension (mm)	550x430x155
Weight (Kg)	57,3
Charge / Discharge Current (A)	100/100
Depht of Discarge	Up to 100%
Communication Port	RS485, CAN, 232, Wifi
Single string quantity(pcs)	Up to 17 pcs ( 993Vdc Max String Voltage )
Altitude (m)	< 3000
Design life	10 Years (25°C)
Expected Life Cycles	Up to 7000 / 25°C
Standards	IEC62619/UL1973 CE/IEC 61000 UN38.3
Features	Auto balancing BMS, 16 channel equalizer, Module local monitoring
Protections	Fuse 200A/1000Vdc Four protection logics for HV Box, Real-time balancing, Adaptive charge/discharge CAN logic, Three steps adaptive charging logic 2xDI/DO programmable ports, Mobile app for monitoring, control, debugging, firmware update and historical information
Notes	See warranty terms for Performance warranty applicability. See Performance Warranty Terms and the Standard Test Conditions ’’STC’’ for operative temperature and standard current. All data is subject to change without prior notice; always ask WeCo for the most recent datasheet and manual before purchasing. No part of this document can be copied or reproduced without written permission of WeCo. 5K3-XP Is designed to operate with rack support and indoor

HV Box Safety Controller

Basic Parameters	5K3-XP HV RACK MODULE FOR INDOOR OR CABINET USE ONLY
Application	String Safety Device
Operative Voltage	150/1000 Vdc
Max Charging Current	150A/30sec
Max Discharging Current	150A/10sec
Manual Breaker capacity	125A
Contactor Capacity	150A (Peak 250/30sec)
Pre-Charge Circuit	150Ohm/4sec (Contactor Max Current 50A)
Insulation Monitor	Yes
Max number of modules per string	17/1000Vdc
Connector type	WeCo PLUGS 200A Fast Connection
Ingress Protection	IP20
Communication Port	RS485, CAN, 232, Wifi, Bluetooth
Altitude (m)	< 3000
Protections With HV Box	HV Box is equipped with 125A Breaker + 150A Contactor + 200A/1000Vdc Fuse Four protection logics for HV Box, Real-time balancing, Adaptive charge/discharge CAN logic, Three steps adaptive charging logic, 2xDI/DO programmable ports, Mobile app for monitoring, control, debugging, firmware update and historical information. Precharge circuit 150 Ohm/4seconds.
Notes	See warranty terms for Performance warranty applicability. See Performance Warranty Terms and the Standard Test Conditions ’’STC’’ for operative temperature and standard current. All data is subject to change without prior notice; always ask WeCo for the most recent datasheet and manual before purchasing. No part of this document can be copied or reproduced without written permission of WeCo. HVBox Rack XP Is designed to operate with rack support and indoor

CONFIGURATIONS


Battery Module	4	5	6	7	8	8+8
Battery System Capacity (kWh)	20.8	26	31.2	36.4	41.6	78
Voltage (Min max)	min 200 max 232	min 250 max 290	min 300 max 348	min 350 max 406	min 400 max 464	min 800 max 928
Cabinet Type B (Outdoor + Cooling)	9 Rack					18 Rack
Cabinet Weight Type B (Empty)	210Kg					290Kg
Modules Weight (Kg)	229.2*	286.5	343.8	401.1	458.4	2×458.4